Pegatanke Professional Epoxy Glue in black is a high-quality epoxy glue, developed to withstand the most demanding physical and chemical conditions. This has a high resistance to extreme temperatures, high tensile strength, hardness is resistant to chemicals and solvents. This can be used on Aluminium, Copper, Ceramic, Wood, Plastic, Metal, Losa, MDF, Glass, PVC and is ideal for welding and repairing motorcycle parts. Seal cracks in water tanks and this is also ideal for sealing cracks and weld radiators. Takes 30 minutes in the sun in ambient temperature between 25 Â°C to 40 Â°C to dry. In shade 1:30 hour up to 2:00 hours. The dry time may increase or decrease because of environmental conditions. Hardness: 25-27 psi, at this pressure level it starts to deform. Tension: 580 psi, at this level of tension it starts to burst. Pressure: 100-120 psi, in holes up to 5mm in diameter. We do not recommend using above this pressure. Weight: 550 lbs. for 50cc. of glue. Vacuum: -28 psi, in holes up to 5 mm in diameter. We have no tests for a major vacuum. Temperature: Greater than 600 Â°F, either by radiation or by contact transmission, not by direct flame. Subzero temperature: -22 Â°F, we have no tests for lower temperature. Drying under water: Takes about 10 hours. (Depending on the temperature in the water this time may decrease or increase). Always follow the instructions carefully.
- High-quality epoxy glue
- Developed to withstand the most demanding physical and chemical conditions
- High resistance to extreme temperatures
- Can be used on Aluminium, Copper, Ceramic, Wood, Plastic, Metal, Losa, MDF, Glass, PVC
- Ideal for welding and repairing motorcycle parts